Battery Replacement
Purge air from hydraulic system after draining oil or changing a filter.
Step 1
- Place the unit in service position.
- Park unit on a flat, level surface.
- Engage parking brake.
- Stop engine, remove key and wait for moving parts to stop and for hot parts to cool.
- Chock wheels. Strap and clamp unit onto lift, if used.
Steps 2 - 4
- Disconnect the negative cable and then the positive cable from the battery.
- Remove the wing knobs securing hold-down bracket to battery and remove bracket.
- Remove battery.
Step 5
- Clean the battery.
- Clean terminals and battery cable ends with a wire brush.
- Coat terminals with dielectric grease or petroleum jelly.
Steps 6 - 9
- Install battery and secure with hold-down bracket and wing knobs.
- Reconnect positive cable and then the negative cable.
- Place boot over positive cable.
- Return seat to operating position.
❮
❯