Wheels

Steps 1 - 3: Rear Wheel Removal
  1. Make sure the unit is on a level surface with the parking brake engaged and the key off.
  2. Choke the front two tires to prevent forward movement.
  3. With a floor jack, position the jack underneath the center of the bottom rear cross-bracket far enough so the jack will not slip but within the boundary of the vertical support bracket.
Steps 4 - 7: Rear Wheel Removal
  1. Carefully raise the jack until two jack stands can be positioned on each side of the rear bottom frame for support.
  2. Lower the jack onto the two jack stands.
  3. Use an impact wrench with a 13/16" socket to remove the five lug nuts.
  4. Remove the tire. Please note the wheel spacer on the hub when the tire is removed.
Steps 1 - 3: Rear Wheel Install
  1. Position the tire back onto the hub. Ensure that the wheel spacer is installed prior to this step.
  2. Use an impact wrench with a 13/16” socket to snug the five lug nuts onto the hub bolts.
  3. Use a torque wrench to torque the lug nuts to 60 – 90 ft.-lbs.
Steps 4 - 7: Rear Wheel Install
  1. Ensure that the front two tires have wheel chalks in front of them.
  2. Position the floor jack underneath the center of the bottom rear cross-bracket far enough so the jack will not slip but within the boundary of the vertical support bracket.
  3. Carefully raise the jack until the two jack stands can be safely removed.
  4. Lower the unit back to the ground.