Service / Electrical / Battery

Battery Download

WARNING:

WARNING: AVOID INJURY.

Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after landing.

Remove Battery
  1. Place unit in service position and remove operator pad.
  2. Disconnect the negative cable and then the positive cable from the battery.
  3. Remove the retain hardware securing battery hold-down plate to frame. Remove and retain plate.
  4. Remove battery.
Clean Battery
  1. Clean terminals and battery cable ends with wire brush.
  2. Coat terminals with dielectric grease or petroleum jelly.
Install Battery
  1. Install battery.
  2. Secure hold-down plate to frame using original hardware.
  3. Reconnect positive cable and then the negative cable.
  4. Place boot over positive terminal.
  5. Set operator platform in the raised position.
  6. Reinstall operator pad.
❮ ❯

©2024 All Rights Reserved

AriensCo