Service / Electrical / Lights
Lights
Light Replacement
Step 1
- TMake sure the unit is turned off. Then disconnect the connector on the wire harness that is plugged into the light.
Step 2
- Use a socket wrench to remove the nylock nut and cup washer on the inside of the front brine tank behind the light.
Retain the hardware.
Step 3
- Use a Phillips screwdriver to remove the front two screws retaining the light and bezel. Retain the hardware.
Step 4
- The light and bezel can now be removed from the front brine tank. Replace the light with the same part
number 09493600. Retain the bezel for installation unless damaged.
Step 5
- Install the bezel and the new light into the front brine tank opening.
Step 6
- Install the two Phillips screws to secure the light to the front brine tank.
Step 7
- Install the cup washer and nylock nut to the longer threaded Phillips screw on the inside of the front brine tank.
Step 8
- Reconnect the harness connector for the light and turn the key switch to the lights position to confirm functionality.
❮
❯