Service / General / Wheels

Wheels

Steps 1 - 5: Rear Wheel Removal
  1. Make sure the unit is on a level surface with the parking brake engaged and the key off.
  2. Chock the front two tires to prevent forward movement.
  3. With a floor jack, position the jack underneath the center of the bottom rear cross-bracket.
  4. Carefully raise the jack until two jack stands can be positioned on each side, underneath each transmission.
  5. Lower the jack onto the two jack stands.
Steps 6 - 7: Rear Wheel Removal
  1. Use an impact wrench with a 13/16" socket to remove the four lug nuts.
  2. Remove the tire.
Steps 1 - 3: Rear Wheel Install
  1. Position the tire back onto the hub.
  2. Use an impact wrench with a 13/16" socket to snug the four lug nuts onto the hub bolts.
  3. Ensure that the front two tires have wheel chocks in front of them.
Steps 4 - 7: Rear Wheel Install
  1. Position the floor jack underneath the center of the bottom rear cross-bracket.
  2. Carefully raise the jack until the two jack stands can be safely removed.
  3. Lower the unit back to the ground.
  4. Use a torque wrench to torque the lug nuts to 60-90 ft.-lbs.
❮ ❯

©2024 All Rights Reserved

AriensCo